Guides

How to make a QR code that still scans when it is printed

By PulseTech Editorial · Published 16 November 2026

A QR code that works on your screen can still fail on a poster, a menu or a business card. Printing adds blur, glare, folds and distance. These rules make printed codes reliable.

Keep the content short

A QR code grows denser the more it holds. A short web address makes a code with large, easy-to-read squares; a long address full of tracking parameters makes a fine, crowded pattern that cheap phone cameras struggle with.

If your link is long, shorten it first, for example with the URL Shortener, or use a simpler page address. If you need tracking, build the link with the UTM builder and then shorten it.

Choose the right type

QR Code Generator can encode more than links:

  • Wi-Fi: guests scan and join the network without typing the password. Remember that anyone who scans it can read the password.
  • Phone, email and SMS: one tap to call, write or text you. Useful on business cards.
  • Plain text: a short message, a serial number or instructions.

Pick the error correction level

QR codes contain spare data that lets them be read when part of the code is damaged. There are four levels:

  • L recovers about 7% damage: densest codes, fine for clean screens.
  • M recovers about 15%: a good default for screens and documents.
  • Q recovers about 25%: recommended for most printed material.
  • H recovers about 30%: for codes that may get dirty, creased, or partly covered by a small logo.

Higher levels make the code a little denser, so combine them with a short link.

Size and distance

A simple rule of thumb: the code should be at least one tenth of the scanning distance. For a business card read from 20 cm away, about 2 cm wide is the practical minimum. A poster read from 2 metres needs a code around 20 cm wide.

Download as SVG for print: it is a vector file, so it stays perfectly sharp at any size. PNG is fine for screens and documents.

Contrast and colours

  • Use a dark code on a light background. Many scanners cannot read light codes on dark backgrounds.
  • Keep strong contrast. Dark blue or black on white or cream works; grey on grey does not.
  • Leave a quiet zone: a clear margin around the code, at least four squares wide. Do not let text or graphics touch it.
  • Avoid printing on glossy, curved or textured surfaces where glare or warping distorts the squares.

Test before you print hundreds

  1. Print one copy at the final size on the real paper.
  2. Scan it with at least two different phones, including an older one, in normal room light.
  3. Try from the distance people will actually stand.
  4. Check that the link opens the right page and that it works on mobile data, not only on your office Wi-Fi.

When the link changes

A QR code stores the address itself, so it cannot be edited after printing. If a page might move, point the code at an address you control and can redirect later, rather than a long link to someone else's site.

The code generator runs in your browser, so the links and Wi-Fi details you enter are not sent to our server.

qr codeprintmarketing

Keep reading